Quick setup: build your first own set
FCC_EA has many settings, but a simple set needs only a few of them. This guide builds one step by step: an EMA cross (9 / 21) on Nasdaq, M3 timeframe, with a fixed stop loss and take profit, breakeven, a partial close and one grid position. Follow the same path for any other method: set the method's own section, then position management, display, magic number and alerts, and leave the rest alone.
The numbers below show where to change things. They are not tested or recommended settings and they do not promise any result. Test your own set in the Strategy Tester and on a demo account first. Trading leveraged products is risky; see the Risk Disclaimer.
What you can ignore
On the Inputs tab (F7 on the chart) every method has its own section, and most modules are off until you turn them on. For an EMA set, leave these sections as they are:
- the sections of the other methods: SMMA, TMA, VWAP, PIVOT, RANGE-BREAKOUT and LIQUIDITY SWEEP SIGNALS SETTINGS, plus RECLAIM and FVG / IFVG SETTINGS (they only matter for the methods that use them),
- HEDGE MODE and HEDGE SIGNAL MODE SETTINGS,
- PYRAMID, TRAILING and EQUITY GUARD SETTINGS (you can add them later, one at a time),
- TRADING TIME SETTINGS: FCC_EA may trade all day; limit the hours later if you want, see Trading hours and breaks,
- FILTERS SETTINGS (add a filter later, one at a time).
Only the section of the selected Signal Method is read for signals, so changing the others does nothing for this set.
Pick the chart and the license
- Open a Nasdaq 100 chart. Brokers name it differently:
USTEC,NAS100,US100,NDX… - Attach FCC_EA and enter your License Key in LICENSE (see Activate your license).
The chart timeframe does not matter for the signals (the Signal Timeframe below does), but an M3 chart shows you the same candles FCC_EA reads.
General settings: method, timeframe, lot
In GENERAL SETTINGS:
| Setting | Example | Why |
|---|---|---|
| Trading Mode | Buy & Sell | Trade both directions. |
| Fixed Lot | 0.10 | Start with a size you can afford to lose on every trade. See Lot size and risk. |
| Signal Method | EMA Signals | The EMA cross method. |
| Signal Timeframe | M3 | Signals are read from M3 candles. |
EMA settings: the two periods
In EMA SETTINGS:
| Setting | Example | Why |
|---|---|---|
| EMA Trigger Period | 9 | The fast EMA. |
| EMA Slow Period | 21 | The slow EMA; must be larger than the trigger period. |
| Slope Filter (skip signals when slow EMA is flat)? | false for now | Turn it on later to skip crosses in sideways markets; tune it with the preview, see EMA Signals. |
Leave the other EMA inputs alone for now.
Position management: stop loss and take profit
In MANAGE POSITION:
| Setting | Example | Why |
|---|---|---|
| Take Profit (points) | 6000 | Where the trade closes in profit. |
| Stop Loss (points) | 3000 | Where the trade closes in loss. |
| SL/Hedge Zone Timeout | 0 | A normal stop loss at the broker. |
Distances are in points, the smallest price step of the symbol. If your broker quotes Nasdaq with two decimals (for example 21450.25), 3000 points = 30 index points; with one decimal (21450.2) it is 300 index points. Check the decimals on the price scale and adjust; see Points, not pips.
Then in BREAKEVEN SETTINGS:
| Setting | Example | Why |
|---|---|---|
| Use Breakeven? | true | Once the trade is in profit, the stop moves to the entry. |
| Breakeven Distance (points) | 2000 | How far price must move first. |
Partial close: bank part of the profit
In CLOSE PARTIAL SETTINGS:
| Setting | Example | Why |
|---|---|---|
| Use Partial Close? | true | Close part of the trade before the take profit. |
| Partial Close Distance (points) | 3000 | Halfway to the take profit. |
| Partial Close % of Position | 50 | Half is closed there, the rest runs on to the TP or the breakeven stop. |
The closed part is rounded to the lot step, so the lot must be big enough to split (0.10 → 0.05 closed, 0.05 left). See Partial close.
Grid: one extra position
In GRID SETTINGS:
| Setting | Example | Why |
|---|---|---|
| Use Grid? | true | Add a position when price moves against the trade. |
| Max Grid Orders | 1 | One grid position on top of the first one, no more. |
| Min Distance Between Grid Orders (points) | 1500 | The grid position opens 1500 points against the first one, well before the 3000-point stop. |
| Grid Lot Martingale Multiplier | 1.0 | The grid position has the same lot as the first one. |
After the grid add, the take profit, breakeven and partial close are measured from the average entry of both positions; the stop stays where the first position's stop was, and if it is hit, both positions close there. Leave the other grid inputs alone.
With the grid position open you hold twice the lot, so a stop loss costs more than with a single trade. Keep the grid distance clearly inside the stop loss and check the loss you would take in the grid example.
Trade limits and reversals
In OTHER SETTINGS:
| Setting | Example | Why |
|---|---|---|
| Max Trades per Day | 6 | Caps the number of signal trades in one day. |
| Close on Reverse Signal? | true | An opposite cross closes the trade and opens the new one. |
| Allow Multiple Positions From Signals? | false | One position at a time. |
| Time Zone of All Time Inputs | New York (EST / EDT) | Pick the clock you think in (New York, London, Central Europe, Tokyo, UTC or your broker's server time). Every time you add later (trading hours, breaks, Close All) is read in this zone, with daylight saving handled for you. See Input time zone. |
| Magic Number | 9021 | Any number; use a different one on every chart that trades the same symbol. See Several charts and the Magic Number. |
Display: see what FCC_EA sees
- In INDICATOR LINES turn on Display EMA Trigger Line? and Display EMA Slow Line?, so the two EMAs are on the chart.
- In OTHER SETTINGS keep Display Info Panel (settings summary)? on. It shows the method, lot, TP / SL and the modules that are on, so you can check the set at a glance; see The info panel.
- Display Bar Close Countdown → Signal TF shows when the next M3 candle closes (optional).
Alerts
In ALERTS turn on Enable Mobile Push Alerts? to get every new trade on your phone, and Alert on Position Close (with PnL)? for the result. Push needs your MetaQuotes ID in the terminal; see Push notifications. Telegram works too: Telegram alerts.
Save the set
Click Save on the Inputs tab and name the file so you know what it is, for example NAS100 M3 EMA 9-21.set. Then click OK. See How to load and save a set file.
Test it
- Run the set in the Strategy Tester on a few months of data.
- Run it on a demo account and watch the Experts log: every signal, and every signal that was blocked, is written there with the reason.
- Change one thing at a time and compare.
Next steps
Once the basic set behaves as you expect, add one module at a time and test again:
- the Slope Filter for sideways markets: EMA Signals,
- trailing instead of a fixed take profit: Breakeven and trailing,
- a trend filter: Trend, VWAP and pivot filters,
- trading hours: Trading hours and breaks.
For another method, follow the same steps and set that method's section instead of EMA SETTINGS: How signals work. If no trades open, see No trades are opening.
All settings for this feature General settings → EMA settings → Manage Position settings → Breakeven settings → Close Partial settings → Grid settings → Other settings → Indicator Lines settings → Alerts settings →
Backtest this setup free in the Strategy Tester, and adjust it whenever the market changes; every feature is in every plan. Backtest results depend on your broker's data and don't guarantee future results.
Check the FAQ or write to us. We reply within one business day.